SHEARER PAINTING 206-431-3606

2720 6th Place South, Seattle, Wa 98134

 

Safety Program
Painting Contractor
Update DEC 2010
NOTICE: What is OSHA and its relationship to WISHA (The Washington Industrial Safety and Health Act)?
The U.S. Congress created the Occupational Safety and Health Administration (OSHA) in 1971 to develop and enforce workplace safety and health rules throughout the country. States may choose to run their own safety and health programs as long as they are at least as effective as OSHA. Washington state has chosen to run its own program and most employers in the state, therefore, are subject to enforcement by L&I and not by federal OSHA. In Washington state, OSHA covers: workplaces with federal employees; nonfederal employees working on federal reservations and military bases; employees working on floating worksites (floating dry docks, fishing boats, construction barges); and employees working for tribal employers on tribal lands.
 Does WISHA apply to you?
WISHA applies to almost every employer and employee in Washington. WISHA applies to you if:

  1. You hire someone to work for you as an employee, including workers from a temporary agency.
  2. You are hired to work for someone as their employee.
  3. You own your own business or you are a corporate officer and have elected industrial insurance coverage for yourself.
  4. You have a contract with someone else that primarily involves personal labor, even though you are not required to pay industrial insurance or unemployment insurance premiums.
  5. You volunteer your personal labor, or you have volunteers working for you who receive any benefit or compensation.

TABLE OF CONTENTS
Topic
Page Safety and Health Policy ....................................................... 1
Safety and Health Objectives ................................................ 2
Job Site Inspections ............................................................... 3
Contractor Safety Administrator ........................................... 4
Personal Protective Equipment ............................................. 5
Safety Rules .......................................................................... 6
Job Safety Training ............................................................... 9
Safety Discipline ................................................................. 10
Fall Protection ..................................................................... 11
Confined Space Entry ......................................................... 15
Confined Space Entry Procedures....................................... 16
Emergency Procedures ........................................................ 17
Caring For Bites And Stings ............................................... 18
Written Hazard Communication Program .......................... 19 I.
Hazard Determination .................................. 19 II.
Labeling ....................................................... 19 III.
Material Safety Data Sheets (MSDS) .......... 19 IV.
Employee Information Training .................. 20 V.
Hazardous Non-Routine Tasks .................... 21 VI.
Informing Contractors .................................. 21 VII.
Pipe and Piping Systems .............................. 21 VIII.
List of Hazardous Chemicals ....................... 22
1
Shearer Painting SAFETY PROGRAM
SAFETY AND HEALTH POLICY
Shearer Painting Company believes that NO JOB OR NO TASK IS MORE IMPORTANT THAN WORKER HEALTH AND SAFETY. If a job represents a potential safety or health threat, every effort will be made to plan a safe way to do the task. Every procedure must be a safe procedure. Shortcuts in safe procedures by either foremen or workers will not be tolerated. If a worker observes any unprotected job, which may pose a potential threat to their health or safety, he or she must inform management and management must take adequate precautions. IF A JOB CANNOT BE DONE SAFELY IT WILL NOT BE DONE. OUR FUTURES ARE ONLY BUILT THROUGH OUR PEOPLE. WE AIM TO PROTECT THEM.
___________________________________________ (Signed)

2
SAFETY AND HEALTH OBJECTIVES Shearer Painting company plans to achieve worker safety and health through the following: A. Using a qualified safety person. B. Making regular job site safety inspections. C. Enforcing the use of safety equipment. D. Following safety procedures and rules. E. Providing on-going safety training. F. Enforcing safety rules and using appropriate discipline.
3
JOB SITE INSPECTIONS The safety person or other designated person will tour each job site and observe potential safety/health hazards, including the potential hazards of confined spaces and develop a plan for safeguarding this company's workers which may include the following: 1. Removing the hazard. 2. Guarding against the hazard as required by WISHA. 3. Providing personal protective equipment and enforcing its use. 4. Training workers in safe work practices. 5. Coordinating protection of workers through other contractors. A record of all safety inspections and correctional steps will be kept.
4
CONTRACTOR SAFETY PERSON ____________Scott McMurray____________Name is the designated person to administer the safety and health program for this organization. The responsibilities for this position are as follows: 1. Being knowledgeable of potential job hazards. 2. Assuring compliance with WISHA construction safety and health standard requirements. 3. Making regular safety inspections. 4. Establishing safety procedures. 5. Correlating regular safety training with lead persons. 6. Maintaining safety records.
5
PERSONAL PROTECTIVE EQUIPMENT 1. Head protection will be worn on job sites when there are potentials of falling objects, hair entanglement, burning, or electrical hazards. 2. Eye protection will be worn when there are potentials of hazards from flying objects or particles, chemicals, arcing, glare, or dust. 3. Protective footwear shall be worn to protect from falling objects, chemicals, or stepping on sharp objects. Athletic or canvas-type shoes shall not be worn. 4. Protective gloves or clothing shall be worn when required to protect against a hazard. 5. Harnesses and lanyards shall be utilized for fall protection as required in WISHA Construction Safety Standards.
6
SAFETY RULES ALL OF OUR SAFETY RULES MUST BE OBEYED. FAILURE TO DO SO WILL RESULT IN STRICT DISCIPLINARY ACTION BEING TAKEN. 1. Keep your mind on your work at all times. No horseplay on the job. Injury or termination or both can be the result. 2. Personal safety equipment must be worn as prescribed for each job, such as: safety glasses for eye protection, hard hats at all times within the confines of the construction area where there is a potential for falling materials or tools, gloves when handling materials, and safety shoes are necessary for protection against foot injuries. 3. Precautions are necessary to prevent sunburn and to protect against burns from hot materials. 4. If any part of your body should come in contact with an acid or caustic substance, rush to the nearest water available and flush the affected part. Secure medical aid immediately. 5. Watch where you are walking. Don't run. 6. The use of illegal drugs or alcohol or being under the influence of the same on the project shall be cause for termination. Inform your supervisor if taking strong prescription drugs that warn against driving or using machinery. 7. Do not distract the attention of fellow workers. Do no engage in any act which would endanger another employee. 8. Sanitation facilities have been or will be provided for your use. Defacing or damaging these facilities is forbidden. 9. A good job is a clean job, and a clean job is the start of a safe job. So keep your working area free from rubbish and debris. 10. Do not use a compressor to blow dust or dirt from your clothes, hair, or hands. 11. Never work aloft if you are afraid to do so, if you are subject to dizzy spells, or if you are apt to be nervous or sick. 12. Never move an injured person unless it is absolutely necessary. Further injury may result. Keep the injured as comfortable as possible and utilize job site first-aid equipment until an ambulance arrives. 13. Know where firefighting equipment is located and be trained on how to use it.
14. Lift correctly - with legs, not the back. If the load is too heavy GET HELP. Stay fit.
7
CONTROL YOUR WEIGHT. Do stretching exercises. Approximately twenty percent of all construction related injuries result from lifting materials. 15. Nobody but operator shall be allowed to ride on equipment unless proper seating is provided. Equipment shall be used only for its intended propose as recommend by the manufacturers. 16. Do not use power tools and equipment until you have been properly instructed in the safe work methods and become authorized to use them. 17. Be sure that all guards are in place. Do not remove, displace, damage, or destroy any safety device or safeguard furnished or provided for use on the job, nor interfere with the use thereof. 18. Do not enter an area which has been barricaded. 19. If you must work around power shovels, trucks, and dozers, make sure operators can always see you. Barricades are required for cranes. 20. Never oil, lubricate, or fuel equipment while it is running or in motion. 21. Before servicing, repairing, or adjusting any powered tool or piece of equipment, disconnect it, lock out the source of power, and tag it out. 22. Barricade danger areas. Guard rails or perimeter cables may be required. 23. Trenches over five feet deep must be shored or sloped as required. Keep out of trenches or cuts that have not been properly shored or sloped. Excavated or other material shall not be stored nearer than two feet from the edge of the excavation. Excavations less than 5 ft may also require cave in protection in some instances. 24. Use the "four and one" rule when using a ladder. One foot of base for every four feet of height. 25. Portable ladders in use shall be equipped with safety feet unless ladder is tied, blocked or otherwise secured. Step ladders shall not be used as a straight ladder. 26. Ladders must extend three feet above landing on roof for proper use. 27. Defective ladders must be properly tagged and removed from service. 28. Keep ladder bases free of debris, hoses, wires, materials, etc. 29. Build scaffolds according to manufacturers' recommendations. 30. Scaffold planks shall be properly lapped, cleated or otherwise secured to prevent shifting.
8
31. USE ONLY EXTENSION CORD OF THE THREE-PRONG TYPE. Use ground fault circuit interrupters at all times and when using tools in wet atmosphere (e.g. outdoors) or with any temporary power supply. Check the electrical grounding system daily. 32. The use of harnesses with safety lines when working from unprotected high places is mandatory. Always keep your line as tight as possible. 33. Never throw anything "overboard." Someone passing below may be seriously injured. 34. Open fires are prohibited. 35. Know what emergency procedures have been established for your job site. (location of emergency phone, first aid kit, stretcher location, fire extinguisher locations, evacuation plan, etc.) 36. Never enter a manhole, well, shaft, tunnel or other confined space which could possibly have a nonrespirable atmosphere because of lack of oxygen, or presence of toxic or flammable gas, or has a possibility of engulfment by solids or liquids. Make certain a qualified person tests the confined area with an appropriate detector before entry, that the necessary safety equipment is worn. Standby person may be required to be stationed at the entrance. 37. While driving wear seatbelts, obey traffic laws and be courteous.
9
JOB SAFETY TRAINING A. After inspecting a job site, the safety person or other designated person will identify and evaluate all potential hazards for: 1. Injury Severity potential. 2. Probability of an accident. B. This person will also appraise the skill and knowledge level of exposed workers. C. Appropriate Training will be given. 1. Hazards will be pointed out. 2. Necessary precautions will be explained. 3. The higher the hazard the more detailed will be the training. D. Records will be maintained for all training sessions with descriptions of topics covered and names of workers trained.
10
. SAFETY DISCIPLINE A. Three-Step System First violation: Written warning; copies to employee and employee's file. Second violation: Written warning; suspension for 1/2 or full day without pay. Third violation: Written report for file and immediate termination. B. Four-Step System First violation: Oral warning; notation for personnel file. Second violation: Written warning; copy for file or Personnel Office. Third violation: Written warning; one day suspension without pay. Fourth violation: Written warning and one-week suspension, or termination if warranted. C. A record will be maintained of all discipline.
11
FALL PROTECTION Falls are one of the leading causes of occupational fatalities in American work the place. Fall protection is high on list for the most frequently cited violation by compliance inspectors when inspecting construction sites. Shearer painting is committed to protecting its workers from this type of hazard by following these policies.
1. Shearer painting will complete a written fall protection plan as specified in wac 296-155-22505 and workers will trained in site specific fall protection before commencing work on any job site.
2. General Superintendent will be responsible to see that the written plan and documentation of the employee training will be maintained on the jobsite.
3. Shearer painting will provide workers approved fall protection equipment as needed for each job. Workers must use fall protection equipment that meets WISHA standards when subject to falls greater than 6'.
4. Workers shall visually inspect their equipment prior to use each day. If a fall is sustained in a harness it must be reported and the equipment must be taken out of service.
5. Full body harness must be used when a worker is in an articulate snorkel lift.
6. When working off of scaffolding over 4' handrails must be in place to provide fall protection
7. Ladders are to be tied off to prevent displacement. If they can't be tied off another worker will hold the bottom of the ladder to stabilize it, or an approved ladder stabilizer will be used.
8. Scissor lifts must have agate closed while in use.
9. In the event that proper fall protection (for example guard rails or static lines) which is the responsibility of the general contractor is not in place, the job foreman should request it's placement from the general contractor.
10. Material and/or debris shall be kept 6' from opening in the working surfaces so workers cannot trip or cause the materials to fall to another level.
11. The job foreman is to monitor his crew and job site for possible fall hazards and to enforce fall protection policies.
12. Loud playing radios or wearing head phones or any other devices that interferes with job site communication or maintaining a safe work place is prohibited.
12
CONFINED SPACE ENTRY No employee shall enter areas defined below without authorization: 1. A space that is NOT DESIGNED FOR CONTINUOUS employee OCCUPANCY; and 2. Is large enough and so configured that a person can bodily enter into and perform assigned work; and 3. Has LIMITED or RESTRICTED means for ENTRY or EXIT; and 4. May have a POSSIBLE HAZARDOUS ATMOSPHERE that may expose employees to the risk of death, incapacitation, impairment of ability to self rescue caused by: A. Flammable gas B. Airborne combustible dust C. Atmospheric oxygen concentration below 19.5 or above 23.5% D. A toxic atmosphere or substance E. Danger of engulfment UNTIL AN AUTHORIZED PERSON EVALUATES THE AREA AND AUTHORIZES ENTRY.
13
GENERAL CONFINED SPACE ENTRY PROCEDURE 1. There shall be no unauthorized entry into a confined space by any person. 2. An authorized person shall examine, test and evaluate a potential entry space and determine if it is a "NON-PERMIT SPACE" and meets the following requirements: A. It does NOT contain any atmospheric hazards or dangers of engulfment capable of causing death or serious physical harm; B. The space has been PROVEN SAFE, has been VERIFIED, DOCUMENTED, and has a CERTIFIED GUARANTEE of a safe environment. 3. If the conditions in #2 have been satisfied, the ALTERNATE ENTRY PROCEDURE may be followed. 4. If conditions in #2 are not met and has any of the following, the PERMIT ENTRY PROCEDURE must be followed: THE SPACE: A. Contains or has a potential to contain a HAZARDOUS ATMOSPHERE. B. Contains a material that has a potential for ENGULFING an entrant. C. Has an internal configuration such that an entrant could be trapped or asphyxiated by inwardly converging wall or by a floor which slopes downward and tapers to a smaller cross section; or D. Contains any other recognized serious safety or health hazard.
14
EMERGENCY PROCEDURES In case of an emergency on site the following procedures should be instituted at each site: 1. Method of communication should be determined at each site, telephone, radio, etc. 2. Emergency telephone numbers should be posted: a. Police b. Fire c. Medical Response Team 3. Post near communication station the address of your site. 4. Post names of first aid responders on site. 5. Designate person to direct emergency crews to site of emergency. 6. Instruction to each employee if known harmful plants, reptiles, animals, or insects, are present regarding all of the following:
a. The potential hazards.
b. How to avoid injury.
c. Applicable first aid procedures to be used in the event of injury.
CARING FOR BITES AND STINGS
15
Insect Bites
Spider Bite / Scorpion Sting
Marine Life Stings
Snake Bites
Animal Bites
Signals
Stinger may be present Pain Swelling Possible allergic reaction
Bite Mark Swelling Pain Nausea and vomiting Difficulty breathing or swallowing
Possible marks Pain Swelling Possible allergic reaction
Bite Mark Pain
Bite Mark Bleeding
Care
Remove stinger – scrape it away or use tweezers Wash wound Cover Apply a cold pack Watch for signals of allergic reaction
Wash wound Apply a cold pack Get medical care to receive antivenin Call local emergency number, if necessary
Initially, soak area in salt water Apply cold pack or paste of baking soda or meat tenderizer Call local emergency number, if necessary
Wash wound Keep bitten part still, and lower than the heart Call local emergency number
If bleeding is minor – wash wound Control bleeding Apply antibiotic ointment Cover Get medical attention if wound bleeds severely or if you suspect animal has rabies Call local emergency number or contact animal control personnel
WRITTEN HAZARD COMMUNICATION PROGRAM
16
GENERAL The following hazard communication program has been established for . This program will be available for review by all employees. I. HAZARD DETERMINATION will be relying on Material Safety Data Sheets from suppliers to meet determination requirements. II. LABELING A. The will be responsible for seeing that all containers coming in are properly labeled. B. All labels shall be checked for: 1. Identity 2. Hazard 3. Name and address of responsible party C. Each shall be responsible for seeing that all portable containers used in their work areas are labeled with identity and hazard warning. III. MATERIAL SAFETY DATA SHEETS (MSDS) A. The will be responsible for compiling the master MSDS file. It will be kept . B. Copies of MSDSs for all hazardous chemicals to which employees may be exposed will be kept in a file at . C. MSDSs will be available for review to all employees during each work shift. Copies will be available upon request to . IV. EMPLOYEE INFORMATION TRAINING A. The shall coordinate and maintain records of training conducted for . B. Before starting work, or as soon as possible thereafter, each new employee will attend a safety class. In that class, each employee will be given information on:
17
1. CHEMICALS AND THEIR HAZARDS IN THE WORKPLACE 2. How to lessen or prevent exposure to these chemicals. 3. What the company has done to lessen or prevent workers' exposure to these chemicals. 4. Procedures to follow if they are exposed. 5. How to read and interpret labels and MSDSs. 6. Where to locate MSDSs and from whom they may obtain copies. C. The employee will be informed that: 1. The employer is prohibited from discharging, or discriminating against, an employee who exercises the rights regarding information about hazardous chemicals in the workplace. 2. As an alternative to requesting an MSDS from the employer the employee may obtain a copy from the Department of Public Health. D. Attendance will be taken at training sessions. These records will be kept by . E. Before any new hazardous chemical is introduced into the workplace, each employee will be given information in the same manner as during the safety class. V. HAZARDOUS NON-ROUTINE TASKS (Delete entire section if not applicable) A. On occasion, employees are required to do work in hazardous areas (e.g. confined spaces). Prior to starting work in such areas, each employee will be given information about the hazards involved in these areas. This information will include: 1. Specific chemical hazards.
18
2. PROTECTION/SAFETY MEASURES THE EMPLOYEE IS REQUIRED TO TAKE TO LESSEN RISKS 3. Measures the company has taken to lessen the hazards, including ventilation, respirators, the presence of another employee, and emergency procedures. B. It is the policy of that no employee will begin work in a confined space, or any non-routine task, without first receiving a safety briefing.
VI. INFORMING CONTRACTORS
A. It is the responsibility of the to provide any other contractors with employees exposed to our chemicals with the following information: 1. Hazardous chemicals with which they may come in contact. 2. Measures the employees should take to lessen the risks. 3. Where to get MSDSs for all hazardous chemicals. B. It is the responsibility of the to obtain chemical information from contractors when they will expose our employees to hazardous chemicals which they may bring into our workplace. VII. PIPE AND PIPING SYSTEMS
A. Information on the hazardous contents of pipe and piping shall be readily
available ____________________________________________________________________
VIII. LIST OF HAZARDOUS CHEMICALS
This is a list of the chemicals used by _________________________________ .
MATERIAL (Name on label and MSDS) Page of ______